How to clean a gas stove at home

A gas stove allows you to cook food in the shortest possible time, while significantly reducing energy costs. However, this appliance appliance clogs the fastest, causing housewives to clutch their heads. Cleaning pens and burners from greasy stains requires patience and attention to detail. The same applies to the surface of the device, which is enameled and glass-ceramic. To choose the best cleaning methods, it is important to come from the type of coating. Consider the important aspects in order, give practical recommendations.

Gas stove cleaning technology

1. Before starting the procedure, disconnect the device from the gas supply panel. As a rule, it is enough to turn off the tap so that subsequently you do not accidentally touch the handle of the stove and supply gas. In cases where the device has a starter button that is powered by electricity, unplug the plug from the wall outlet (unplug).
2. Prepare a solution: grate 1 bar of laundry soap on a fine section grater (the concentration of active substances should not be less than 70%), pour over 7-8 liters. boiling water, mix and bring the composition to a homogeneous state. After this, pour the hot solution into a wide container (basin, bath, etc.), place the grate in the cavity. Make sure that the composition covers the element completely. The exposure time is 3-4 hours, during this period the fat and burning soften, which will make it easy to remove the formation in the future.
3. Remove the burners, set them aside, later we will consider the technology for cleaning these elements. While the grate is soaking, remove from the stove dry food debris, crumbs, seasonings, etc., which are easily removed without water. There is no need to treat the surface with water, otherwise cleaning will drag on for a long time. Use a dry foam sponge or a lint-free cloth to remove residues.
4. The next step is cleaning the pens. This stage is rightfully considered the most difficult, since small elements contain many hard-to-reach spots, which are quite difficult to get to. As is the case with burners, we will describe the process of cleaning the handles below to highlight the main aspects.

How to clean a glass ceramic gas stove

Among other things, the use of salt and baking soda is considered to be banned "home" products for cleaning glass ceramics. The listed components also contain abrasive particles, which in their structure damage the coating.

Neglecting this advice, you risk leaving microcracks on the surface that will fill with grease and dirt, thereby distorting the aesthetic appearance of household appliances.

Special Cleaning Compounds
For glass ceramic panels, special cleaning products have been developed that can be found in the household chemistry departments. The following are considered the most effective: “Lav” (Perl, Bril, Cucina), “KAMA Sol”, “Fairy”, “Spul Balsam”, “Kara-Form Asset”, “Tana Professional”.

To clean the plate with the listed means, use the manufacturer's instructions, which is indicated on the back of the bottle. In most cases, it is enough to apply the paste / gel to the panel, maintain the interval, and then rinse.

Folk remedies

1. Prepare a solution for soaking: dilute 90 gr. chopped edible salt 125 ml. boiling water, mix until the granules dissolve. Pour the gas stove with the resulting solution, leave for 10 hours. After the specified time, remove the residue with a kitchen sponge, rub the panel with a damp cotton cloth, rinse with water.
2. Grate a third of the bar of laundry or tar soap, dilute shavings 170 ml. boiling water. Add 25 gr. drinking soda, 60 ml. table vinegar (concentration 9%), mix until the crystals dissolve. Pour the gas stove with the prepared solution, wait 5 hours. After that, collect excess liquid with a rag, clean the surface with a foam sponge, rinse with water.
3. Bring together 60 ml. dishwashing detergent, 80 gr. drinking soda, 20 gr. shallow sea salt. Dissolve 35 ml. silicate glue in 190 ml. filtered water at room temperature. Mix the two compounds into one, fill the gas stove panel, leave for 1.5-2 hours. Next, clean the surface with a soft cloth, rinse off the residue with warm water, wipe it dry.

How to clean an enameled gas stove

According to experts, the enameled coating is cleaned with the same means as the glass ceramic. The only difference is that when processing enamel, you can use alkaline and acid preparations, they will not spoil the coating. However, do not clean with hard metal sponges that scratch the enamel.

As for salt or soda, they can only be used as part of a solution, and not in dry form. Even small abrasive particles damage the surface. In the case of folk remedies, the main feature will be the proportions, which varies taking into account the characteristics of the coating.

1. Mix 45 gr. table salt with 65 ml. table vinegar, add 40 gr. soda. Pour the mixture over with hot water, mix until crystals are dissolved. Fill the enamel coating, wait 10 hours. After the time has passed, rub the carbon and grease deposits, rinse off the excess with clean water.
2. Grate half a bar of laundry soap on a coarse grater, fill with water so that a pasty mass is obtained. Scoop a little funds on the hard side of the foam sponge, rub the surface with the composition, leave for 12 hours. After that, moisten the sponge with water, treat the contaminated surface, collecting fat and burning. Remove excess with paper towels, wipe dry.
3. Dilute in hot water 45 gr. hand wash powder, add 50 ml. gel for washing dishes, mix until smooth. Pour the solution onto a gas stove, cover the surface with cling film, leave for 5 hours. Blot excess moisture, clean the stove with a sponge, rinse.
4. Mix together 45 ml. ammonia (ammonia) with 5 liters. purified water at room temperature. Fill the surface of the plate with the composition, leave for 1 hour. After the expiration date, thoroughly rub the dirt, wash the stove with dishwashing liquid.

Universal gas stove cleaning methods

Use the step-by-step instructions to remove grease stains from the surface of the gas stove. It is suitable for panels of all types of material and is considered to be universal.

1. Boil 0.5 liters of water in a kettle, fill the stove, leave for 2 hours. Over this period, old and burnt food debris will soften, so you can easily remove them.
2. Blot the stove while collecting liquid. Mix 200 ml. warm purified water with 150 ml. ammonia. Put on gloves, dampen a sponge in the solution, and thoroughly rub the contaminated area. Important! Do not clean the plate using a hard metal lip and products that include abrasive particles (soda, salt, etc.).In cases where it is not possible to remove fat from hard-to-reach places with a sponge, use a cotton swab or a soft toothbrush.
3. If you cannot clean with ammonia, use the following product. Squeeze juice from 3 lemons, add 50 ml. table vinegar, soak in the composition of the sponge. Spread the solution on the panel, leave for 1 hour.
4. Sponge the plate, rinse. You can also use citric acid: dilute 1 sachet of the composition in 70 ml. pure water, add 35 ml. vinegar, use as directed.

How to clean the handles of a gas stove

Handles are rightfully considered to be complex elements in terms of cleaning, fat often accumulates on their surface and under them, which is difficult to remove with a regular foam sponge.

Removable handles

1. Prepare a soap solution: grind in cubes or grate 1/3 of a bar of laundry soap on a grater, pour boiling water, wait until complete dissolution. Dip the pens into the mixture, leave for 4 hours. After that, clean them with a hard iron washcloth or a toothbrush, wash them.
2. To speed up the process, use vinegar essence (do not confuse with table solution, its concentration is 8 times lower). Mix 65 ml. product with 0.5 l. hot water, dip the handle into the mixture, wait 2 hours. During this time, fat and soot will soften, you just have to remove them with a sponge and rinse with water.
3. Place the pens in hot water for 5 hours. Make a paste of baking soda and vinegar so that it is thick. Take out the handles, scoop up the paste with a sponge, rub each element, leave for half an hour. After this period, rub the body fat again with a toothbrush, rinse.

Fixed handles

1. Make porridge from soda and cold filtered water, rub the surface of the handles with a regular sponge. Try to remove fat to the maximum.
2. Dampen a cotton swab in liquid ammonia, carefully rub the gaps, corners and the area under the handles. Change sticks as you use. Leave the composition for 1 hour.
3. After the due date, remove the excess with toothpicks, rub the entire area of ​​the handles and the area under them with a toothbrush well, rinse with water, wipe.

How to clean gas stove burners

1. Remove the hotplates. Prepare a solution: dilute a third of the bar of soap chips in 3 liters of boiling water, place the elements in the container, pour in the mixture. Leave for 1.5 aces.
2. After the time has expired, wash the top of the lid with dishwashing detergent or special household chemicals. Apply a paste that does not contain alkali and chlorine on the aluminum (inner) area of ​​the burner. Clean this area with a metal sponge or toothbrush.
3. To clean the nozzles on which the burners are located, use copper wire. First remove the hob, then remove the soot with a string. If possible, clean the metal hot, this move will facilitate the task.

It is easy to clean the gas stove, if you have sufficient information regarding the procedure. Use the universal technology for removing fat and carbon deposits, consider folk recipes based on laundry soap, citric acid, soda and salt. Use household chemicals, follow exposure times and manufacturer's recommendations.

Video: how to clean the gas stove grill