How to clean a gold chain at home

The content of the article

1 Dentifrice
2 Vaseline and chalk
3 Sprite and Sea Salt
4 Tar soap and camomile
5 Baking soda
6 Table vinegar and salt
7 Ammonia
8 Video: how to clean gold at home

After prolonged wear, the gold chain loses its luster. This is because sweat particles and keratinized skin cells settle on the links. Also, there are cases when cream for the neck and decollete, hair spray, and perfume fall on women's jewelry. In combination with dust, the chain undergoes plaque, which is difficult to remove on your own if you do not have sufficient knowledge.

Dentifrice

Get dental powder at a hardware store (cost about 20 rubles). Prepare the mixture as follows: mix 40 gr. powder with 20 ml. filtered water, stir. As a result, you should get a thick, moist mixture, otherwise bring the mass to this state by adding more water.

Type the composition on a soft toothbrush with even bristles, place the chain on the palm of your hand, treat one side first, then the other. The larger the composition, the more effective the cleaning. The disadvantage of this method is low efficiency, the toothbrush can leave microcracks, and the powder does not completely remove dirt. If you have a professional whitening paste, it is better to use it. The cleaning procedure is identical.

how to clean gold jewelry

Vaseline and chalk

The method is suitable for regular prevention and cleaning of the gold chain, provided that the composition is used weekly. Otherwise, the result will be incomplete, in hard-to-reach places there will be dirt mixed with cosmetics and sweat particles.

Get natural chalk, grind it into powder so that it turns out 35-40 gr. Add 25 ml to it. filtered boiled water, 20 gr. petroleum jelly. Take 1/10 part of laundry or tar soap, rub it on a fine grater, add to the composition. If the mass is dry, dilute it with boiling water. Put the product in the microwave, heat for 30 seconds.

Scoop a little of the resulting paste onto a flannel shawl, wipe the chain well. If the result is insufficient, use a soft-bristled toothbrush. At the end of the procedure, rinse the composition with boiling water and remove the excess with vodka.

Sprite and Sea Salt

Many clean Coca-Cola gold, but it contains a lot of dyes, unlike Sprite, so the latter option is preferred. Pour 300 ml into a glass. carbonated drink, add 50 gr. fine sea salt and mix until crystals are dissolved. Dip the chain into the solution, wrap the glass with cling film or cover with a lid, wait a day. At the end of time, rinse the jewelry with clean water and dry naturally by laying it on a soft cloth.

Tar soap and camomile

Buy chamomile flowers at the pharmacy, take 55 gr. plants and brew 200 ml. boiling water. Leave for 1 hour, strain several times, otherwise grass particles will fall into the holes between the links. Now cut a slice of tar soap about 1.5 cm wide from the tar soap bar. Grate it, dip it into the broth and heat in the microwave. Stir, wait until the granules are completely dissolved.

Put the chain in the mixture and leave for 2-3 hours. After the expiration of the period, you can wipe the product with a soft lint-free cloth or treat it with a toothbrush and dry it naturally. If desired, tar tar can be replaced with laundry soap, dishwashing liquid or hand wash powder. In all cases, the main thing is to remove the remaining funds so that there is no plaque left.

how to clean old coins at home

Baking soda

Take an enameled pan, pour 1.5 liters. filtered water, add 300 gr.baking soda. Bring the composition to a boil, reduce the heat, wait for the crystals to completely dissolve. Prepare a cotton bag, put a chain in it so that there is enough space inside for it to move and rub against the fabric.

Put the bag in the pan, it should not touch the bottom or walls of the container. If necessary, double the number of components if this helps to carry out the procedure correctly. Boil the chain in a bag for about 40-60 minutes, periodically add water with soda at the rate of 5: 1. Toward the end of the term, take out the chain and put it in the pan, turn off the fire, wait another quarter hour. After that, rinse the decoration with boiling water, put on a dry cloth and let dry.

Table vinegar and salt

Mix 45 gr. chopped edible salt with 110 ml. table vinegar, mix the composition with a wooden spatula. Add 350 ml. boiling water and wait 20 minutes. At the end of time, place the chain in a solution, leave for 2 hours, then rinse and wipe with clean vinegar.

Ammonia

To effectively cleanse light plaque and give the chain shine, dilute 5 ml. ammonia 250 ml. warm boiled water, pour 50 ml. thick dishwashing detergent, mix well with a wooden or plastic stick. Place the decoration in a container, wrap the neck with cling film and wait 2.5 hours. Then rinse the chain with boiling water. In cases where the dirt is too strong, leave the product for 4-5 hours, then rinse with water.

If these options do not give 100% of the result, prepare a new solution: mix 15 ml. ammonia and 8 ml. hydrogen peroxide solution, the concentration of which varies from 3 to 6%. Leave the chain in the resulting solution overnight, be sure to cover the container with a film or a lid. At the end of the action, carefully rinse the jewelry first with boiling water, then with warm filtered water.

You can clear the gold chain of old plaque and oxide by home methods, it is not necessary to contact a jeweler for help. To do this, just use table vinegar, soda, sea salt, a mixture of chalk and petroleum jelly, tooth powder. Whatever the method, always rinse the product after processing.

how to quickly clean silver