How to remove polyurethane foam from clothes at home

A large number of advantages, positive reviews and advantages has a building material - polyurethane foam. But if builders see in it only the good side, then the housewives have a different opinion. Once on clothing, curtains, any fabric surface, removing the sealant becomes a problem, which creates a headache for women. Neither hand wash nor machine wash in such cases. But before disposing of a thing, try the following tips.

One of the key points of this process is speed, i.e. measures must be taken immediately while the foam is in a non-frozen state. That is why nail polish remover has a poor reputation as a foam cleaner. It really will not be useful to you if the sealant has already hardened or deeply absorbed into the fabric. But if you act immediately, then there are good chances to cope with the trouble.

Nail polish remover, gasoline (refined), acetone

1. Before starting to wipe the stain, try to remove the upper layers of sealant with a knife (spatula, blade).
2. Then, it is necessary to check the effect of the product on a small area of ​​tissue hidden from the eyes, for example, on the inside. Perhaps the fabric will stain. If this does not happen - proceed.
3. Moisten a cotton pad in the liquid used and try to wipe the stain. You can pour a small amount of the used product on it, this will help speed up the process.
4. After the stain is removed, the product must be washed.

Chemical cleaners, aerosols, special pastes

1. If you plan to carry out repairs on your own, then be sure to buy a special cleaner along with the sealant in the supermarket. It helps to clean the gun from foam, and also helps dissolve the sealant on the fabric.
2. As in the previous case, first try to mechanically clean the surface of the foam as much as possible.
3. Having applied a thick layer of the product used on the product, it must be left for half an hour.
4. After subjecting the item to repeated mechanical cleaning, try to knead the damaged area well.
5. Then again apply a layer of the product and also leave for half an hour, after the thing should be washed in normal mode.
6. When using an aerosol, the problem area should be greatly moistened and left for half an hour, then resort to the mechanical method and wash the contaminated thing.
7. Pastes must also be applied in a thick layer and left for the specified time. After the procedure, the product needs to be washed with plenty of powder.

Medical tool - Dimexide

1. You can purchase at any pharmacy. The tool is a synthetic drug, the active substance, which is dimethyl sulfoxide. It is he who contributes to the dissolution of stubborn stains, such as, for example, superglue.
2. Try to clean the clothes from foam as much as possible, scraping off its remnants. Blot a cotton pad with the preparation and apply liquid to the contaminated area.
3. The tool needs 30 minutes to penetrate deeper into the stain, after which it can be removed and cleaned with a brush in the direction of the fabric fibers.
4. The product also needs to be washed, after which the item must be thoroughly rinsed.

Cold and sunlight

The action of the cold on the removal of such spots was checked by the mistresses, repeatedly. In this way, chewing gums are removed from children's clothing.

1. A product stained with foam for installation is placed in the freezer.
2. When the sealant completely freezes it can be easily removed by hand.
3. The remaining dirt will come off easily under the influence of nail polish remover or acetone.
4. Exposure to sunlight helps to destroy the structure of the foam.
5. Clothing should be left in the sun for a long time, periodically removing collapsing pollution.

Vegetable oil

Heat three tablespoons of oil and apply them to a pre-cleaned stain. It is necessary to wait about 5 minutes for the area to be completely saturated with oil.

Apply washing powder, and add a little water, foam. Then, using a cotton pad, wipe the stain thoroughly and wash the item.

Safety precautions

There is a likelihood that after the first procedure to remove the stain, one way or another, it will remain. Then repeat the process again. But the best option would be if you do not allow the sealant to get on your clothes. When working with such materials, use old clothing so that the appearance of a stain on it does not upset you.

Video: how to remove polyurethane foam from clothes